The two ways to suppress a 22 are an integral setup, where the suppressor is built into a replacement barrel, and a standalone silencer, where a threaded can mounts on the muzzle and moves between guns.

Neither is better across the board. The right one comes down to whether you want one rifle that is permanently quiet or one can that quiets your whole safe. This is a setup decision, not a brand decision, so start with how you actually shoot.

What is an integral suppressor setup?

An integral setup builds the suppression into the barrel itself. The Vanquish 22 is a fully rifled 18 inch replacement barrel with zero baffles and a Bentz match chamber, and it drops into the 10/22 you already own.

The gun becomes the suppressor, so nothing hangs off the muzzle and there is no first round pop. You end up with a dedicated quiet rifle that balances and points like a standard gun. If your goal is one 22 that is always ready to shoot quiet, this is the setup. The complete guide to an integrally suppressed 10/22 covers it end to end.

What is a standalone suppressor setup?

A standalone setup is a threaded can that mounts to the muzzle and can move to your next rifle whenever you want. The Reticent 22 is 2.5 ounces of Grade 5 titanium on a 1/2×28 mount, so it adds almost no weight and swaps across every rimfire you own.

One can serves your 10/22, your pistol, and your bolt gun. If you shoot several 22s and want one suppressor to cover all of them, the standalone setup is the efficient way to do it. The 2.5 ounce titanium build explains why the weight stays that low.

Integral vs standalone, side by side

Which setup fits how you shoot?

• You want one 22 that is always quiet and balances like normal: the integral setup.
• You own several rimfires and want one can for all of them: the standalone setup.
• You care most about match accuracy in the quietest single package: the integral setup, built around the Bentz chamber.
• You are building a collection over time: start standalone, add an integral host when you want a dedicated quiet rifle.

Do the two setups cost the same to own?

The hardware differs, $535 for the integral barrel against $345 for the standalone can, but the paperwork is identical. Each is a single registered suppressor that transfers on one tax stamp, and as of 2026 that stamp costs $0. Electronic approvals are clearing in days rather than most of a year, covered in the current eForm 4 timeline guide.

Setup is where the real cost difference lives, not the government fee. Feed either one with the right subsonic ammo and the quiet takes care of itself.

When is each setup the wrong call?

The integral setup is the wrong call if you only want one suppressor and need it to move across several rifles, because it is dedicated to the gun it is installed on. The standalone setup is the wrong call if you want a rifle with nothing hanging off the muzzle and no added length, since a threaded can always adds some.

Pick the setup that matches how you shoot, then pick the product inside it. On a 10/22 specifically, the two paths compared head to head make the tradeoff concrete.

Two setups, one decision

Choose the integral Vanquish 22 for a permanently quiet rifle that adds no weight and no length, or the standalone Reticent 22 for one 2.5 ounce can that quiets the whole safe. Both go quiet with no first round pop and both carry a lifetime warranty. Match the setup to how you shoot, and either one is the right answer.

Frequently asked questions

Featured Products

• Vanquish 22 Suppressed Ruger 10/22 Barrel
  Rated 4.50 out of 5 based on 2 customer ratings
  $599.00 Original price was: $599.00.$535.00Current price is: $535.00.
• Reticent 22 Suppressor
  Rated 5.00 out of 5 based on 3 customer ratings
  $375.00 Original price was: $375.00.$345.00Current price is: $345.00.