An integrally suppressed 10/22 replaces the factory barrel with one that has the suppressor built into its profile, so the gun goes quiet without anything bolted to the muzzle.

The Ruger 10/22 is the most suppressed rifle in the country, and the integral path is the cleanest way to build one. Nothing hangs off the front, there is no first round pop, and the rifle balances like it did before you touched it. This guide covers how it works, how it compares to a threaded can, what it costs, and how to buy one.

What is an integrally suppressed 10/22?

It is a Ruger 10/22 fitted with a replacement barrel that has the suppressor built into the barrel itself, rather than a separate can threaded onto the muzzle. The Vanquish 22 does this with a fully rifled 18 inch barrel cut to a Bentz match chamber and zero baffles inside.

You are upgrading the rifle, not adding a part to it. The result is a dedicated quiet 10/22 that looks and handles like a standard rifle, because the quiet work happens inside the barrel profile instead of out past the muzzle.

How does an integral barrel actually work?

A conventional suppressor traps and slows expanding gas in a can attached to the end of the barrel. An integral barrel moves that job inside its own profile, venting and slowing the gas along the length of the barrel instead of at a single point out front.

Zero baffles means there is no stacked baffle core to clean, foul, or shoot loose. Gas bleeds off in a controlled way before the bullet ever leaves the muzzle, which is why the very first shot is as quiet as the hundredth.

Why is the 10/22 the rifle everyone suppresses?

The 10/22 is cheap to feed, simple to work on, and it takes to a suppressor better than almost anything on the rack. It runs standard 22LR all day for pennies a round, the aftermarket is enormous, and a barrel swap is a bench job most owners can do at home.

Pair the most suppressed platform in the country with a barrel built to go quiet, and you get the natural end point of the whole 22LR hobby. If you are choosing between the integral route and a threaded can, the integral vs traditional suppressor comparison breaks down both paths in detail.

Integral barrel vs traditional suppressor: how do they differ?

Both go quiet. They differ in where the suppression lives and whether it moves between guns. An integral barrel like the Vanquish 22 stays with one rifle and adds nothing to the muzzle. A threaded can like the Reticent 22 weighs 2.5 ounces, mounts on any 1/2×28 rimfire, and swaps across your whole safe. Here is the side by side.

Does an integrally suppressed 10/22 give up accuracy?

No, and the integral route usually gains it. The Vanquish 22 barrel is fully rifled and cut to a Bentz match chamber, a tighter chamber built for the lead 22LR round rather than the loose factory spec.

A match chamber and a quality barrel are what accuracy comes from, and the Vanquish 22 has both. You are not trading precision for quiet here. You are replacing a factory barrel with a better one that also happens to be suppressed.

Why does no first round pop (FRP) matter?

Most traditional suppressors hold a pocket of oxygen that ignites on the first shot, producing a loud crack the rest of the string never repeats. That is first round pop, and it is the shot your ear remembers. The Vanquish 22 has no FRP by design.

Every shot sounds the same, from the first round of the day to the last. On a rifle you shoot in short bursts, plinking and pest control, that consistency is the whole point.

How do you install an integrally suppressed 10/22 barrel?

Easy. Select your model below (standard or takedown) and watch the short video.

Ruger 10/22 Standard Barrel Installation video

How to install the Vanquish 22 Barrel in a standard Ruger 10/22 Rifle. This also applies to the Charger 10/22

Ruger 10/22 Takedown Barrel Installation video

How to install the Vanquish 22 Barrel in a Ruger 10/22 Takedown Rifle

How do you buy an integrally suppressed 10/22?

The Vanquish 22 barrel is the registered suppressor, so it transfers like any can. As of 2026 the federal transfer tax is $0, and electronic filing has approvals clearing in days rather than the better part of a year.

You order online, choose your dealer at checkout, complete the transfer, and pick up once approved. Real timelines are covered in the current eForm 4 approval guide. When you build yours, feed it right with the best subsonic and standard velocity 22LR ammo for suppressed shooting.

The complete quiet 10/22, in one barrel

You get a fully rifled 18 inch Bentz match barrel, zero baffles, no first round pop, and nothing hanging off the muzzle, backed by a lifetime warranty, for $535.

The Vanquish 22 barrel drops into the 10/22 you already own and turns it into a dedicated quiet rifle that still balances and points like a standard gun. That is the integrally suppressed 10/22 done right.

Frequently asked questions

Featured Products

• Vanquish 22 Suppressed Ruger 10/22 Barrel
  Rated 4.50 out of 5 based on 2 customer ratings
  $599.00 Original price was: $599.00.$535.00Current price is: $535.00.
• Vanquish 22TD Suppressed Ruger 10/22 Takedown Barrel $599.00 Original price was: $599.00.$535.00Current price is: $535.00.
• Vanquish 22 Suppressed Ruger Charger Barrel $599.00 Original price was: $599.00.$535.00Current price is: $535.00.