Vanquish Integrally Suppressed AR9 16″ Barrel

(Over) designed for professional hard use

• Heat Reduction: The Vanquish 9 stays cooler under sustained firing, allowing full use of your handguard during normal operation without the risk of contact burns

• Reduced Gas Blowback: Unlike traditional suppressors, the baffleless design vents more toxic gasses out the front of the barrel instead of back into your face

• No Sonic Crack: Precision ported barrel allows 115 grain ammo to remain subsonic with no first round pop

• Effortless AR9 Upgrade: Easily install the Vanquish barrel on any straight blowback AR9 (see video below)

Experience the Vanquish 9 and discover why it’s rapidly earning its place as a preferred choice for law enforcement agencies worldwide.

Specifications:

• CALIBER: 9MM
• PLATFORM: AR9
• BARREL: 16″ precision ported barrel in 4140R chrome-moly steel with a 1-10” twist
• OUTER SHROUD: 316 stainless steel with a High Temp Black or Flat Dark Earth Cerakote finish
• FULL AUTO RATED: Yes
• OVERALL LENGTH: 16.2”
• COUNTRY OF MANUFACTURE: Made in Charlotte, NC USA

The Vanquish 9 is a NFA item and considered a suppressor per the ATF.

Vanquish Helpful Resources

If you have questions regarding the Vanquish, please see our Vanquish resources page. It contains detailed videos and answers to many of the commonly asked questions we receive.

Handguard compatibility:

For maximum compatibility we recommend our suppressor series 14.8″ handguard. The Vanquish shroud has an outer diameter of 1.5″ and requires a handguard with a minimum inner diameter that accounts for this dimension. The integrally suppressed barrel can be used with any mil-spec upper receiver.

M-LOK attachment compatibility:

Depending on the handguard you choose, you may need to use shorter M-LOK screws when installing attachments. This will prevent the screws from coming into contact with the suppressor shroud. It’s worth noting that most screws provided with attachments are longer than necessary. Based on our experience, we have found that the Vanquish barrel and handguards with a minimum inside diameter of 1.72″ are generally compatible with most M-LOK accessories. Just remember to use shorter M-LOK screws for optimal fit.

Barrel installation:

Vanquish Barrel installation video

Installing the Vanquish suppressed barrel is the same as a standard barrel. Start by aligning the index pin on the barrel extension with the slot in your upper receiver. Then, follow the instructions provided by the handguard manufacturer to install the barrel nut and handguard. Lastly, slide the shroud over the barrel and securely attach the end cap to the threaded section. For detailed assembly instructions, refer to the instruction manual provided.